Substation Terminal Node Series

Sentinel 21 Family of Substation and Feeder Automation Products.pdf


 The same powerful 6CPP6 Central Processor Panel used in the ePAQ-9100 series is available in a circuit board configuration for surface mounting in substation or outdoor enclosures with an expandable discreet I/O hardware interface to the utility’s field wiring.

The 6CPP6 processor’s features offer Communication Management for the Smart Substation Environment restoring full productivity to the crowd of substation Intelligent Electronic Devices (IEDs) and the myriad of communication media now available at remote locations. Based on a rugged 32-bit processor and communication flexible architecture, the 6CPP6 spans the gap between your existing SCADA investments and new communication and Intelligent Electronic Device technologies. The 6CPP6 supports an expanding library of Master Station and IED protocols, and is continually being enhanced to provide new functionality  

SS-01


The programmable 6CPP6 Central Processor can serve as:

• An intelligent protocol to protocol converter
• A stand-alone substation controller and display interface
• Local and remote access to Intelligent Electronic Devices
• A Load Management Controller
• A programmable device for user defined tasks within the substation

6CPP6 Benefits: 

• Smart communication for your substation
• Upgrade to new open protocols while preserving your investment in existing RTU hardware
• Use SCADA system communication channels to make full use of your new IED investment
• Monitor and control displays in the substations for authorized personnel
• Make your existing RTUs “smarter”  

 

6CPP6 Features:

• Powerful 32-bit processor
• Laptop or Touch Panel local user interface & Web Page support
• Expandable communication interfaces:
      Ethernet (10/100baseTX, 100baseFL), RS232, RS485
• Multi-Master support (polled or quiescent)
• Extended library of Master Station and IED protocols
• Windows-based ConfigWiz-Plus® software
• Environmentally hardened:
     IEEE SWC isolation, -30 to +70º C, 5% to 95% humidity  

STN-9050 Substation Terminal Node 

 

SS-03

 

The STN-9050 Substation Terminal Node consists of a 6CPP6 Central Processor Panel in a small, wall-mounting, outdoor cabinet with a fixed point-count I/O panel

•  Library of Server & IED Client protocols
•  Ethernet, RS232, RS485 and 202T interfaces
•  Windows-based ConfigWiz-Plus® Software
•  16ea Status/Accumulator Inputs, 8ea Analog Inputs,
   4ea Select-Before-Operate Controls
•  Sequence of Events (SOE) Recording
•  Wall-mounting, outdoor cabinet  

 STN-9150 Substation Terminal Node  

SS-02

  
The STN-9150 Substation Terminal Node consists of a 6CPP6 Central Processor Panel and expandable modular discreet I/O panels mounted in a large or mid-sized outdoor cabinets.  

•         Library of Server & IED Client protocols  
•         Ethernet, RS232, RS485 and 202T interfaces  
•         Windows-based ConfigWiz-Plus® Software  
•         Modular expandable Status/Accumulator, Analog 
          Inputs, and Select-Before-Operate Controls  
•         Sequence of Events (SOE) Recording  
•         Large or Small, free-standing, outdoor cabinet 

 

STN-9180 Substation Terminal Node w/High-Density I/O  

SH-02


The STN-9180 w/High Density I/O consists of a 6CPP6 Central Processor Panel in a large substation enclosure, with High Density I/O card cage(s) connected to status and analog termination boards. QEI’s 9180 I/O Card Cage houses status input, analog input, and control output cards for installations that require extremely high input/output point capacity. The Card Cage backplane interfaces with the ePAQ and STN series 6CPP6 Central Processor Panel. The 6SC Status Cards, 6AC Analog Cards have ribbon cable connectors to 6STB status termination boards and 6ATB analog termination boards, which provide noise isolation and compression screw terminals for termination of field wiring. 6CC Control Cards have compression screw terminations mounted directly on the back of the card cage.

 

•     Library of Server & IED Client protocols 
•     Ethernet, RS232, RS485 and 202T interfaces 
•     Windows-based ConfigWiz-Plus® Software 
•     Modular Status/Accumulator Inputs, Analog Inputs,
      and select-before-operate Controls 
•     Sequence of Events (SOE) Recording 
•     Large, free-standing, outdoor cabinet 

 

 

Substation Automation
ePAQ Multifunction Gateways
Distributed Remote Terminals
Upgrades to older QEI RTUs
Sentinel-21 Software Products


Contact us to request more information, or call: 973.379.7400
Home | Products | Request Information | Customer Service | Company History | Password Request | Sales Rep. Locator | News & Press Releases | Industry Links | Tradeshow & Conferences | Career Opportunities

© Copyright 2007 - 2011 CG Automation Solutions Inc. All rights reserved, Various trademarks held by their respective owners.